Background Music Systems
We offer a large range of off the shelf 100v Line PA system packages for installation into bars, restaurants, schools, churches, Mosques and commercial properties. If you do not see what you require, or unsure of what you exactly require then do not hesitate to contact us. Our specialist audio support advisors can help at every stage of your installation, from offering initial guidance, full design with wiring diagrams, phone support during your installation to full installation carried out by one of our approved contractors.
So what are 100v Line PA Systems and how do they work?
100v Line or Constant Voltage speaker systems refer to networks of loudspeakers which are connected to an audio amplifier using step-up and step-down transformers to simplify impedance calculations and to minimize power loss over the speaker cables. In short it is a high impedance system that allows for multiple loudspeaker installation from a single amplifier, the amount of speakers used will depend on the power rating of the amplifier and the power tapping options of the loudspeaker.
15 x Wall mount speaker/ceiling speaker @ 6 watt tap setting = 90w - This would require a minimum of 100w amplifier as the total speaker power rating should not exceed 90% of the amplifiers total power rating. The speakers can be installed into multiple zones (rooms) from a single zone amplifier with the use of attenuators (volume controller) to control volume in each zone, or alternatively installed with a multi zone amplifier such as the Clever Acoustics MA 4120MP 4 Zone Mixer Amplifier.