Ceiling Speaker System For TV - 4 x Q Acoustic QI65CB Ceiling Speakers
(
SSD7635 )
Key Features
- TV ceiling speaker system
- Coaxial 2-way speaker driver arrangement for a wide frequency output
- Optical input to directly connect your TV to the system
- Stereo speaker output for immersive audio when watching TV
- Multiple line inputs with independent volume per channel
We offer a comprehensive design, consultancy & installation service. Call now to discuss your project or book a free site visit
Telephone 020 3326 0903
Ceiling Speaker System For TV - 4 x Q Acoustic QI65CB Ceiling Speakers
Offering superb sound quality and discreet fitment, this fantastic package is ideal for modern living areas and TV rooms. The amplifier includes all the inputs most systems will require, and has the benefit of a line output that can feed an active subwoofer if desired. (not supplied)
Q Install QI65CB 6.5″ In Ceiling Speakers
The Q Acoustics QI65CB speaker has been designed to offer exceptional value in terms of performance and cost, its efficiency is particularly high, in fact it requires less than half the amplifier power of the standard Qi65C to produce the same volume of sound.
The full range driver has been carefully designed to give good bass extension a detailed mid-range for voice reproduction and an extended high frequency range without the need for a conventional crossover and tweeter arrangement.
Fonestar WA-2154D Stereo Amplifier 2x15W
Perfect for discreet audio visual installations, the Fonestar WA-2154D stereo amplifier is a low profile Class D unit with 2x 15W RMS.
Featuring a standard RCA stereo input, a 3.5mm aux jack input, and selectable Coaxial or Optical audio input, the WA-2154 is ideal for amplifying modern televisions. With low impedance stereo speaker outputs and a line output that can be taken to an active subwoofer, this is a great alternative to using a soundbar.
Package Includes
- 4x Q Acoustics Qi65CB 6.5" Ceiling Speaker 60W
- 1x Fonestar WA-2154D Stereo Amplifier 2x 15W
- 1x TOSLink Optical Lead 4mm Cable 10m Black
- 1x PD Connex Speaker Cable Kit 10m 2x 0.75mm2
- Bezel and grille design that clips magnetically into place, with the grille geometry being carefully optimized to ensure the perfect balance between sound and discreet appearance
- The HF is adjustable by + or - 3dB from a switch on the crossover
- Circular and square grille options are available to ensure the perfect match for each customer's decor.
- Only 6.5" in diameter, they are hardly visible in your home and take up virtually no space
- Less than 84 mm deep.
- 'UL94' flame retardant materials
- Q Install speakers come carefully packaged with installation template and fitting instructions
- Compact class D stereo amplifier
- Steel case for surface assembly
- Digital and analogue audio inputs
- Stereo loudspeaker output
- Headphone output
- Connector Type A: TOSLINK Plug
- Connector Type B: TOSLINK Plug
- Cable Length - Imperial: 32.8ft
- Colour: Black and Red
- Tweeter diameter: 0.75" (19mm)
- Woofer diameter: 6.5"
- Cutout Size: 203mm
- Power handling (program): 15-60W
- Impedance (nominal) Ohms: 8 Ohms
- Sensitivity dB spl (2.83V, 1m): 89
- Response(Low frequency) -3dB Hz: 75
- Maximum rear depth: 79mm
- Size(Round grilles): 232mm dia
- Power: 2 x 15 W RMS at 4 Ohms
- Protection: Short circuit and temperature
- Response: 20-20,000 Hz
- Distortion: Harmonic: 0.06 percent at 1 kHz
- Inputs: 1 optical SPDIF, toslink, 1 coaxial SPDIF, RCA, 2 aux lines, 2 x RCA and 3.5 mm stereo jack
- Outputs: 4-8 Ohms loudspeakers, Euroblock, 1 aux line, 2 x RCA, 1 headphones, 3.5 mm stereo jack
- Controls: Input signal selector, Digital input signal selector: optical or coaxial, General volume, Headphone volume
- Indicators: LED power indicator, LED indicator for input 1 signal
- Power supply: 12V DC, 2 A with adapter included
- Dimensions: 205 x 25 x 108 mm depth
- Weight: 0.6 kg (with adapter included)
- N/A
- CSA: 0.75mm
- Conductor: 24x0.2mm
- Outer diameter: 2.5 x 5.5mm
- Weight (kg): 0.3