Vonyx VXA-800 2-Channel Power Amplifier
(
DDA0444 )
Key Features
- 800W PA amplifier
- Two channels that can be operated in stereo or bridge mode
- Ground lift switch that eliminates noise generated by cable ground loops
- NL2, 6.3mm Jack or screw terminals to connect suitable speakers
- Gain control on each channel with peak clip indicators
We offer a comprehensive design, consultancy & installation service. Call now to discuss your project or book a free site visit
Telephone 020 3326 0903The VXA-800 is part of the higher-end range of power amplifiers from Vonyx, suitable for professional DJs, PA installation and other sound install applications.
With improved SMT (surface mount technology) the VXA range are capable of powering speakers systems to a higher standard for PA purposes.
With 19 inch 1 UNit rack mounting, the VXA range also incorporate professional NL2 speaker connections as well as 6.3mm jack and terminal outputs for connecting to most speaker cabinets.
- High quality 2x400W stereo amplifier
- Stereo and bridge mode
- Clip LEDs for indicating overload
- Ground lift switch
- Perfect DC output protection
- 19" rack mountable
- RCA and 6.3mm Jack inputs
- NL2 speaker connectors, 6.3mm Jack and terminal outputs
- Output channels: 2
- Peak Power Bridged 8 Ohms (W) : 800
- Peak Power 8 Ohms (W) : 2 x 300
- Peak Power 4 Ohms (W) : 2 x 400
- Max Bridged 8 Ohms (W) : 300
- Max Power 8 Ohms (W) : 2 x 120
- Max Power 4 Ohms (W) : 2 x 150
- RMS Bridged 8 Ohms (W) : 150
- RMS Power 8 Ohms (W) : 2 x 60
- RMS Power 4 Ohms (W) : 2 x 75
- Speaker connections: 6.3mm jack, Speaker screw terminal
- Input connections: 6.3mm Jack, RCA
- Output connections: 6.3mm Jack, NL-4
- Frequency response : 10Hz - 20.000Hz
- Crosstalk: >70dB
- Signal-to-noise ratio: >90dB
- Damping Factor: >250
- Slew rate: 30V/uS
- Input sensitivity line: 775mV - 1.2V
- Input impedance: 20 kOhm
- Power supply: 220-240VAC 50Hz
- Dimensions (L x W x H): 482 x 295 x 88mm
- Is the item 19"?: Yes
- Weight: 6.9500
- MPN: 172.050
Can I connect a subwoofer to this amplifier?
If so how?
If I would like to connect 4 speakers, what would be the max power and ohm per speaker?
Thanks for your input.
Adrian
You would only be able to connect a passive subwoofer to this amplifier using the powered outputs - an active subwoofer cannot be connected.
If you want to connect four speakers to the amplifier, you would need to ensure that your speakers are capable of running at a 4-Ohm impedance level. The output per channel at 4 Ohms is 400W, so your speakers would need to be around 200W max power each.