Adastra 5.75" Waterproof Ceiling Speakers Pair & Bluetooth Amplifier
(
SSD2040 )
Key Features
- In-ceiling speaker kit
- Compact amplifier that can be placed discreetly in any area
- Bluetooth connectivity for wireless audio streaming
- Stereo output that splits the left and right channels to the two speakers
- Weatherproof speaker design for installation in high-moisture environments
We offer a comprehensive design, consultancy & installation service. Call now to discuss your project or book a free site visit
Telephone 020 3326 0903Includes
2x Adastra 125.032 5 Inch Replacement Speaker Drivers 80W
1x E-Audio B426BL Bluetooth 4.0 Stereo Audio Amplifier 2 x 15 W with Aux Input
1x PD Connex Speaker Cable Kit 10m 2x 0.75mm2
Adastra 125.032 5 Inch Replacement Speaker Drivers 80W
These water resistant speakers are perfect for panel mounting. And due to their water resistance will be perfect for outside installation on the patio or decking where you can have a little background music whilst you enjoy those summer brews and barbeques without worrying about taking the speakers indoors if the english summer rain takes you by surprise. Wherever you want to install speakers, but are worried about them getting wet these are perfect for those conditions. These speakers measure 40w RMS so are perfect for those acoustic environments.
E-Audio B426BL Bluetooth 4.0 Stereo Audio Amplifier 2 x 15 W with Aux Input
This compact Bluetooth audio amplifier allows the connectionof Bluetooth devices to low impedance speakers via the built-in power amplifier. It also has an auxiliary input so devices can be connected by 3.5mm jack connection. The unit can power up to 2 x 15W speakers at 4 or 8 Ohms and is supplied with two 3m speaker cables and 1 x 4 way phoenix connector.
The compact design makes the unit ideal for fitting into small spaces like ceiling voids and is powered by a 12V PSU (Supplied). The unit is ideally suited to ceiling speakers but can work equally well with wall or floor mounting units. Connection to different devices is simple and secure using the username and password in the manual.
Please note the bluetooth connection overrides the line in connection when playing music when both are connected at the same time. Please note the item is not compatible with Amazon products Alexa and Echo.
Skytronic 1MFIG Copper Speaker Cable
- Power MAX: 80W
- Power RMS: 35W
- Cutout: 112mm Diameter
- Diameter: 148mm Diameter
- Frequency response: 100Hz - 20kHz
- Impedance: 8 Ohms
- Magnet Weight: 184g (6.5 Oz)
- Mounting Depth: 56mm
- Speaker Size: 13cm (5")
- SPL @ 1W/1m: 86dB
- Supplied: Pair
- Connects low impedance speakers directly to Bluetooth compatible devices
- Compatible with most Bluetooth Devices
- Comes with auxiliary input
- 12V Power supply Included
- Password is required to sync to your devices
- Bluetooth Version 4.0
- Colour: Black and Red
- 2-way speakers
- 5cm (2") tweeter with mylar cone
- IP35 rated
- White plastic enclosure
- Spade terminal connections (6mm)
- Woofer with polypropylene cone
- Built in crossOver
- Includes fixing kit
- Tweeter: 50mm (2")
- Humidity Max: 95%
- Temperature Range: 20 - 85 Degrees
- Product Dimensions (mm): 27x118x41
- Net weight (kg): 0.128
- Bluetooth Version: 4.0
- Frequency Response (Hz): 80-18000
- Power Input: 12v
- Power RMS (W) 4 Ohms: 2 x 15
- Power Supply Included: Yes
- CSA: 0.75mm
- Conductor: 24x0.2mm
- Outer diameter: 2.5 x 5.5mm
- Weight (kg): 0.3