Volume Attenuator

Volume attenuators can be wired inline with each speaker to specifically and conveniently adjust the volume level.

Now Shopping by

Cable Length
N/A

In stock
Regular Price £70.00 Special test Price £62.00
Power Dynamics SSW8 8-Zone Speaker Selector Switch
Distribute up to 8 speaker pairs across 8 channels
Enable or disable each pair independently
Durable push-button switches
Spring clip terminals for connections
Operates without an external power source
In stock
Regular Price £70.00 Special test Price £62.00

Free delivery and weekend delivery available

More Info

In stock
In stock
£28.00
Power Dynamics SSW4 4-Zone Speaker Selector Switch
Speaker zone selector switch
Allows connection of up to four speaker pairs
Independent on/off switch for each speaker zone
Operates without the need for a power supply
Reliable push terminals ensure secure speaker cable connections
In stock
£28.00

Free delivery and weekend delivery available

More Info

In stock

Volume attenuators are used as a convenient way to control the volume from your speaker system. From reliable brands including Fonestar, Power Dynamics and Adastra, these attenuators enable you to store the amplifier out of sight or reach and still control the volume. Consequently, they are great for both home and commercial sound systems. They fit neatly into the wall, making them both easily accessible and discreet enough to suit use in offices, living rooms and public places.

These wall volume controls are for placement between your amp and speakers in your audio system. Using an attenuator alters the volume output by reducing the power output from the amplifier before sending the signal to the speakers.

The attenuators that we offer have a dial design, often with a numbered 0 to 10 scale to give you a visual aid to altering the volume output. As a result, they can be used to manually fine-tune the volume of several daisy-chained speakers at once, helping you to achieve a balanced and consistent sound across your speaker system.

Our stepped attenuator volume controls fit into a cutout in the wall using a back box. This enables them to fit into your wall, giving a discreet and low-profile appearance. Many of them are designed to fit into a cutout design for a light switch, with this uniform size further ensuring that they will look perfectly natural on your wall.

In addition to volume attenuators, there are also speaker switches in this category. These are for multi-zone speaker setups, allowing you to choose whether all zones are being used to play audio, or just the ones you need.

Frequently Asked Questions

What is a Volume Attenuator?

A volume attenuator is a device used in installed audio systems to control the volume level of speakers by reducing (attenuating) the signal strength sent from an amplifier. Unlike volume knobs on amplifiers, attenuators are typically installed in-wall or in-line with speaker wiring, allowing localised volume adjustments for specific zones or areas without affecting the overall system.

They are passive devices and are available in various power ratings and impedance levels to match the system's requirements. Volume attenuators are commonly used in commercial or multi-room setups where independent volume control is needed in different spaces.

Why Would You Need a Volume Attenuator?

A volume attenuator is useful in installed audio systems when you need localised volume control for individual zones or speakers. This is common in commercial spaces, such as offices, restaurants, or retail stores, where different areas may require different audio levels while sharing a single amplifier.

Do Attenuators Affect Sound Quality?

Attenuators can affect sound quality, but the impact is typically minimal if they are well-designed and properly matched to the system. High-quality attenuators maintain the integrity of the audio signal as they reduce volume, ensuring minimal distortion or loss of frequency response.

However, lower-quality or poorly matched attenuators may introduce issues such as signal degradation, noise, or uneven attenuation across frequencies. Using an attenuator appropriate for the system's power and impedance will help preserve sound quality.

Does Wattage Matter on Volume Attenuators?

Yes, wattage is an important consideration when choosing a volume attenuator. The attenuator must be rated to handle the maximum power output (wattage) of the amplifier and the speakers it controls. Using an attenuator with a lower wattage rating than the amplifier can result in overheating or damage to the attenuator.

Selecting an attenuator with sufficient wattage ensures it can safely manage the audio signal without distortion or failure, especially at higher volumes. Always check the system's power requirements and choose an attenuator with an appropriate wattage rating.

What Does an Audio Attenuator Do?

An audio attenuator reduces the strength of an audio signal, allowing control over the volume level without altering the audio's quality or introducing noise. In installed audio systems, it is typically used to adjust speaker volume in specific zones or rooms independently of the main system volume.

Can an Attenuator Damage an Amp?

An attenuator can potentially damage an amplifier if it causes a mismatch in impedance or is improperly rated for the system. Amplifiers are designed to work within a specific impedance range; if the attenuator adds too much resistance or drops the impedance too low, it could strain the amplifier, leading to overheating or damage.

To prevent this, ensure the attenuator is compatible with both the amplifier's output impedance and the connected speakers. Properly matched attenuators that meet the power and impedance requirements of the system will not harm the amplifier.

Where do you put a Volume Attenuator?

A volume attenuator is typically installed in-line between the amplifier and the speakers, often mounted in a wall for convenient access. In a multi-room or zoned audio system, it is placed in the area it controls, allowing localised volume adjustment without affecting the main system.

The attenuator is connected to the speaker wiring, and its location should be easily accessible yet close to the speakers it manages.