My Basket
Your shopping basket is empty.
Vonyx VXA-800 2-Channel Power Amplifier
(
DDA0444 )
(
DDA0444 )
(
DDA0444 )
£165.00
Only 6 left
We offer a comprehensive design, consultancy & installation service.
Call now to discuss your project or book a free site visit
Key Features
(
- 800W PA amplifier
- Two channels that can be operated in stereo or bridge mode
- Ground lift switch that eliminates noise generated by cable ground loops
- NL2, 6.3mm Jack or screw terminals to connect suitable speakers
- Gain control on each channel with peak clip indicators
Other products in this range:
Product Description
The VXA-800 is part of the higher-end range of power amplifiers from Vonyx, suitable for professional DJs, PA installation and other sound install applications.
With improved SMT (surface mount technology) the VXA range are capable of powering speakers systems to a higher standard for PA purposes.
With 19 inch 1 UNit rack mounting, the VXA range also incorporate professional NL2 speaker connections as well as 6.3mm jack and terminal outputs for connecting to most speaker cabinets.
FEATURES
Features
(
- High quality 2x400W stereo amplifier
- Stereo and bridge mode
- Clip LEDs for indicating overload
- Ground lift switch
- Perfect DC output protection
- 19" rack mountable
- RCA and 6.3mm Jack inputs
- NL2 speaker connectors, 6.3mm Jack and terminal outputs
SPECIFICATIONS
Specifications
(
- Output channels: 2
- Peak Power Bridged 8 Ohms (W) : 800
- Peak Power 8 Ohms (W) : 2 x 300
- Peak Power 4 Ohms (W) : 2 x 400
- Max Bridged 8 Ohms (W) : 300
- Max Power 8 Ohms (W) : 2 x 120
- Max Power 4 Ohms (W) : 2 x 150
- RMS Bridged 8 Ohms (W) : 150
- RMS Power 8 Ohms (W) : 2 x 60
- RMS Power 4 Ohms (W) : 2 x 75
- Speaker connections: 6.3mm jack, Speaker screw terminal
- Input connections: 6.3mm Jack, RCA
- Output connections: 6.3mm Jack, NL-4
- Frequency response : 10Hz - 20.000Hz
- Crosstalk: >70dB
- Signal-to-noise ratio: >90dB
- Damping Factor: >250
- Slew rate: 30V/uS
- Input sensitivity line: 775mV - 1.2V
- Input impedance: 20 kOhm
- Power supply: 220-240VAC 50Hz
- Dimensions (L x W x H): 482 x 295 x 88mm
- Is the item 19"?: Yes
- Weight: 6.9500
- MPN: 172.050
Customer Reviews
Based on 7 reviews
Write Review
Sort
Clear Filters
Order By
Newest First
Oldest First
Most Popular
Highest Rating
Breakdown
3
1
2
1
0
Product Reviews
In a musical instrument system,...
Vonyx VXA-800 2-Channel Power Amplifier
In a musical instrument system, I initially had installed a stereo amplifier that I built myself based on TDA7293 chips (100W RMS per channel, class AB); it was convection cooled and therefore had no annoying fan noise when operating. I replaced it with VONXY-800 and the sound quality is not as good as my home-build amplifier, and the fan noise is very annoying for the VONYX-800. I am unsure why the sound has degraded unless the VONYX-800 is based on a D-class switch-mode configuration. I am presently weighing up reinstalling the initial amplifier again, although it is of lesser power. It is this experience that gives me mixed feelings about the VONYX-800. Mechanically it seems well built and it has functioned reliably.
5 years ago
Hope PA Amplifier....
Vonyx VXA-800 2-Channel Power Amplifier
Hope PA Amplifier.
6 years ago
Great product...
Vonyx VXA-800 2-Channel Power Amplifier
Great product
6 years ago
Great product...
Vonyx VXA-800 2-Channel Power Amplifier
Great product
7 years ago
1
2
New content loaded
Product Questions
Hi,
Can I connect a subwoofer to this amplifier?
If so how?
If I would like to connect 4 speakers, what would be the max power and ohm per speaker?
Thanks for your input.
Adrian
Can I connect a subwoofer to this amplifier?
If so how?
If I would like to connect 4 speakers, what would be the max power and ohm per speaker?
Thanks for your input.
Adrian
Question by: Adrian on 22 Dec 2022, 16:58
Hi,
You would only be able to connect a passive subwoofer to this amplifier using the powered outputs - an active subwoofer cannot be connected.
If you want to connect four speakers to the amplifier, you would need to ensure that your speakers are capable of running at a 4-Ohm impedance level. The output per channel at 4 Ohms is 400W, so your speakers would need to be around 200W max power each.
You would only be able to connect a passive subwoofer to this amplifier using the powered outputs - an active subwoofer cannot be connected.
If you want to connect four speakers to the amplifier, you would need to ensure that your speakers are capable of running at a 4-Ohm impedance level. The output per channel at 4 Ohms is 400W, so your speakers would need to be around 200W max power each.
Answer by: Josh Clarke on 23 Dec 2022, 10:12